MARKALAR
Tüm Markaları Görüntüle
WEBER TEX PLAST SİL 25 KG
WEBER
Stok Kodu
6140

WEBER TEX PLAST SİL 25 KG

BİZE ULAŞABİLİRSİNİZ
*
*
*
İnşaat Projeleriniz ve Toplu Ürün Alımlarınız için info@seycan.com.tr' den Fiyat Teklifi Alabilirsiniz.
Ürün Bilgisi
Yorumlar
Taksit Seçenekleri
Önerileriniz
WEBER TEX PLAST 25 KG, EXTERIOR APPLICATIONS

USE

APPLICATION AREA

  • It is used as a topcoat material on the exterior of all buildings and on exterior thermal insulation systems.

APPLICATION SURFACES

  • exteriors;
    - Cement-based plasters,
    - Gross concrete ( weber.tec R, weber.tec RK or weber.tec RM applied),
    - Gas concrete (aerated concrete plaster   applied).
  • For old surfaces, see the Problem/Solution Suggestions section.   You can review.
  • Consult us for all other application substrates.

APPLICATION LIMIT

  • It is not applied on horizontal and inclined surfaces below 45 degrees.
  • It is definitely not applied on wet and damp surfaces.

PERFORMANCE

  • Brightness: G
  • Dry Film Thickness: E5
  • Grain Size: S3
  • Water Vapor Transfer Rate: V2
  • Water Transfer Rate: W3
  • Crack Covering Feature: A0
  • CO 2 Permeability: C0
  • Mold Growth Resistance: K2

These values have been obtained as a result of laboratory experiments and are valid for the performance of the finished applications at the end of the full drying period. Values may change due to the difference in the construction site environment.

REFERENCE STANDARDS

  • TS 7847
  • G Marking
  • Public Works Pos.No: 04.563/01

APPLICATION FEATURES

  • Average application thickness: 1.5 mm.
  • Drying time: 6-24 hours.

SURFACE PREPARATION

  • The surface must be clean, dry, smooth and solid.
  • The surfaces should be primed with weber.prim C 100 diluted in a single layer of 5/1 (weber.prim C 100 / water) and weber.tex plast sil application should be started after at least 12 hours.
  • The weber.tec RM applied surfaces should be primed with weber.prim satin as a single layer without diluting, after drying (min 6 hours), the entire surface should be treated with weber.prim C 100 thinned at the rate of 5/1 ( weber.prim C 100 / water). The coat should be primed and weber.tex plast sil application should be started after at least 12 hours.
  • For better results, weber.prim C 100 suitable for the color of the weber.tex plast sil to be applied should be used.

APPLICATION CONDITIONS

  • Ambient temperature: +5 °C to +30 °C.
  • Application in very humid and/or very hot weather should be avoided.
  • It should not be applied on surfaces that are frozen, melting or at risk of frost within 24 hours.

APPLICATION

  • 20 m2 areas should be determined with paper tapes so that there are no joints on large surfaces and color transitions can be harmonious.
  • weber.tex plast sil should be mixed thoroughly until it becomes homogeneous.
  • weber.tex plast sil should be spread evenly on the surface with a stainless steel or plastic trowel.
  • Application thickness should be adjusted according to the largest pattern stones.
  • The surface should be patterned with a stainless steel or plastic trowel with circular movements.
  • Before weber.tex plast sil hardens, the adhesive tapes should be carefully removed.
  • The specified times are valid at 20 °C surface and ambient temperature, the time is extended at low temperatures and shortened at high temperatures.
  • Saint Gobain Weber Yapı Kim.San.ve Tic.A.Ş. is not responsible.

 

 

APPLICATION TOOLS

Steel trowel, plastic trowel, roller in the post.

WARNINGS AND SUGGESTIONS

  • In order to avoid tonality differences, care should be taken to use products with the same CHARGE NUMBER and PRODUCTION DATE on each front.
  • In the rainy season, on rainy days or in case of rain after the application, the facade should be protected or the application should not be made.
  • When working in strong winds or under direct sun on very hot days, attention should be paid to the water setting, work should be done in series, large surfaces should be divided into sections with tapes or no application should be made.
  • Absolutely salt water, lime and similar foreign materials should not be added.
  • All tools used after the application should be washed with water before drying.
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
WEBER TEX PLAST SİL 25 KG 6140
WEBER TEX PLAST SİL 25 KG

Tavsiye Et

*
*
*
IdeaSoft® | Akıllı E-Ticaret paketleri ile hazırlanmıştır.